[c-nsp] WS-X6704-10GE oper state : not supported
Patrick Longomba
patmopp at gmail.com
Thu Jul 30 13:27:58 EDT 2015
Hi Guys,
Someone could tell me if he has already met this issue ?
the module is ok , we got traffics, everything is ok but when we run "
show power " the module is on not supported state.
I think it's a bug.
Thanks for your help.
------------------ show power ------------------
system power redundancy mode = redundant
system power total = 2771.16 Watts (65.98 Amps @ 42V)
system power used = 1953.84 Watts (46.52 Amps @ 42V)
system power available = 817.32 Watts (19.46 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-3000W 2771.16 65.98 OK OK on
2 WS-CAC-3000W 2771.16 65.98 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 WS-C6509-E-FAN 150.36 3.58 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1 WS-X6704-10GE 333.06 7.93 333.06 7.93 on on
*2 WS-X6704-10GE 333.06 7.93 - - on off (not
supported)*
3 WS-X6748-SFP 254.94 6.07 254.94 6.07 on on
5 WS-SUP720-3B 282.24 6.72 282.24 6.72 on on
6 WS-SUP720-3B 282.24 6.72 282.24 6.72 on on
8 WS-X6748-GE-TX 325.50 7.75 325.50 7.75 on on
9 WS-X6748-GE-TX 325.50 7.75 325.50 7.75 on on
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit = 10920.00 Watts (260.00 Amps @ 42V)
system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
system primary power used = 1953.84 Watts (46.52 Amps @ 42V)
system auxiliary power used = 0 Watt
Patrick
More information about the cisco-nsp
mailing list