[c-nsp] AToM

[Mihai Gabriel]

Use a subinterfate (MUX-UNI) on 7600 instead of VLAN.

On Tue, Mar 24, 2015 at 9:49 AM, Mohammad Khalil <eng_mssk at hotmail.com>
wrote:

> Hi all
> I am trying to establish AToM between 7613 and 3600
> The module from the 7613 side is 7600 ES+ 20xGE SFP
>
> 3600#sh run int vlan 183
> interface Vlan183
>  no ip address
>  xconnect 172.20.40.7 7232183 encapsulation mpls
>
> 7613#sh run int vlan 183
> interface Vlan183
>  no ip address
>  load-interval 30
>  xconnect 172.20.40.232 7232183 encapsulation mpls
>
> 7613#sh mpls l2transport vc 7232183
>
> Local intf     Local circuit              Dest address    VC ID      Status
> -------------  -------------------------- --------------- ----------
> ----------
> Vl183          Eth VLAN 183               172.20.40.232   7232183    UP
>
> 3600#sh mpls l2transport vc 7232183
>
> Local intf     Local circuit              Dest address    VC ID      Status
> -------------  -------------------------- --------------- ----------
> ----------
> Vl183          Eth VLAN 183               172.20.40.7     7232183    DOWN
>
> I have tried to configure L3VPN (VRF on both routers and test loopback
> interfaces) and it worked fine
>
> Any ideas?
>
> BR,
> Mohammad
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>