[c-nsp] Cheap BGP router for ~20k prefixes
Adam Vitkovsky
Adam.Vitkovsky at gamma.co.uk
Sat May 2 07:08:07 EDT 2015
> Mark Tinka
> Sent: 01 May 2015 19:55
> To: Dan Brisson; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Cheap BGP router for ~20k prefixes
>
>
>
> On 30/Apr/15 16:35, Dan Brisson wrote:
> > Looking for suggestions for a device (switch/router) that can speak
> > BGP and do around 20k prefixes. The other requirement is minimum
> > 500Mb/s of throughput, which seems to throw a low-end Cisco router out
> > of the mix. I know a 3560 switch can do BGP and wouldn't have the
> > throughput limitations the router lines have. The cost is probably
> > going to creep up again though when adding Enterprise code for BGP
> > support.
> >
> > I'm really hoping to stay in the sub $2000 range, if possible.
> >
> > Mikrotik has some very impressive gear and I know folks on this list
> > are mixed on them. But something like their CCR1036-12G-4S has
> > impressive specs and an even more impressive price tag - ~$850.
>
> CSR1000v?
>
Interesting idea,
CSR1000v BW can go up to 10GE (license base upgrade) right?
adam
---------------------------------------------------------------------------------------
This email has been scanned for email related threats and delivered safely by Mimecast.
For more information please visit http://www.mimecast.com
---------------------------------------------------------------------------------------
More information about the cisco-nsp
mailing list