[c-nsp] Port Channel Speed

[ryanL]

i think he means the port channel is showing as 10GE, even though he's got
2x10GE interfaces in the bundle.

On Mon, May 11, 2015 at 9:18 AM, Justin M. Streiner <streiner at cluebyfour.org
> wrote:

> On Mon, 11 May 2015, sathish kumar Ippani wrote:
>
>  Here when we checked the sh int portchannel 1. it shows following output.
>>
>> port-channel1 is up
>>
> [...]
>
>>  Members in this channel: Eth1/1, Eth1/2
>>  1 interface resets
>>  30 seconds input rate 611861136 bits/sec, 64564 packets/sec
>>  30 seconds output rate 403292840 bits/sec, 45537 packets/sec
>>
>
>  Would like to know the two different speeds shows in the output. I,e 20Gb
>> and 10Gb
>>
>
> If I'm understanding you correctly:
>
> The stats for the port-channel interface are just the total of the stats
> for the members of the port-channel.  You can look at the stats for the
> individual interfaces (Et1/1 and Et1/2 in this case) to see how much
> traffic is going across them.
>
> Hope that helps.
>
> jms
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>