[c-nsp] Load balancing

[Martin]

M K,

Can you **__PLEASE__** make your posts readable?

You know, it *_WILL_* make it easier for us to understand what your
request is...

Thank you from all on the list...

Martin

P.S. It is also polite to use a real name...



On 11/05/15 10:45, M K wrote:
> Hi allI have the below setup
>           SW6     /               \SW4 --------SW5  |                   |  R1             R2      \           /         LAN (Customer)      Now SW4 , SW5 and SW6 are running REP where the blocking occurs on the segment between SW4 and SW5What the customer is asking for is Load balancing for both incoming and outgoing trafficWhat we have suggested is that we can implement GLBP on the segment between R1 , R2 and the customer LAN (Switch) , but that will control outgoing traffic only right ? Another issue arises is that how we can insure that when a host generates a packet and that packet follows the path R2 - SW5 - SW6 will come back through the same path not from the other one?
> Thanks 		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>