[c-nsp] Logs are empty

[Michael Malitsky]

This is going to sound stupid, and I am hoping it's just complete lack of sleep that's causing me to overlook something.  Can anyone clue me in please?

Working with a brand new 2911, 15.4(3)M2.  I can't get anything to show up in the logs.  Neither monitor, nor buffer.  I am not next to it, don't know about console.  Turning on debugs doesn't produce any messages.

Rt1#sh run | sec logg
logging count
logging message-counter log
logging message-counter debug
logging queue-limit 1000
logging buffered 128000
logging rate-limit 500
logging console critical
no logging monitor
cts logging verbose
crypto logging session
no logging trap
line vty 0 4
 logging synchronous limit 1000


After being up for 8 hours:
Rt1#sh log
Syslog logging: enabled (806141 messages dropped, 67549 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.

    Console logging: level critical, 0 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: disabled
    Buffer logging:  level debugging, 13 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: enabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: disabled

Log Buffer (128000 bytes):

*Jan  2 00:00:03.911: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan  2 00:00:04.091: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = securityk9 and License = securityk9
*May 12 09:31:24.631: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0
*May 12 09:31:32.287: %CTS-6-ENV_DATA_START_STATE: Environment Data Download in start state
*May 12 09:31:35.007: %PA-3-PA_INIT_FAILED: Performance Agent failed to initialize (Missing Data License)
*May 12 09:31:35.031: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized
*May 12 09:31:35.035: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled
*May 12 09:31:39.327: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*May 12 09:31:39.331: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*May 12 09:31:39.331: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
*May 12 09:31:40.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*May 12 09:31:40.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*May 12 09:31:40.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up


Sincerely,
Michael