[c-nsp] 7600 upgrade recommendations?

[Mack McBride]

This often depends on what your vendors have in stock that they are trying to get rid of.
Especially on the used market where 9001s are practically non-existent.
Either will make an excellent border, or use one of each to protect against
code specific bugs. We use different models in our environment to protect against
code bugs because we got bit when we were running 6500s as borders years back.

Mack McBride | Network Architect | ViaWest, Inc.
O: 720.891.2502 | mack.mcbride at viawest.com | www.viawest.com | LinkedIn | Twitter | YouTube



-----Original Message-----
From: Nick Hilliard [mailto:nick at foobar.org]
Sent: Monday, May 18, 2015 9:18 AM
To: Mack McBride; Bill Buhlman; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7600 upgrade recommendations?

On 17/05/2015 20:04, Mack McBride wrote:
> The ASR1006, should give you good service as a border with ESP40 and SIP40 cards.

good service, but the cost per port of asr9001 is often a good deal better.

Nick

This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message.