[c-nsp] 7604 incorrent counter values on VLAN interface

[Blake Dunlap]

Are you sure this isn't a counter wrap issue? Are you using the 64 bit
counters or the default 32 bit in cacti?  The wrap line is right
around 1gig is why i ask.

On Fri, May 22, 2015 at 9:34 AM, Mark Tinka <mark.tinka at seacom.mu> wrote:
>
>
> On 22/May/15 08:42, Oleksii Zolotarov wrote:
>> Hi all, few days ago I was confused when Cacti showed me low traffic
>> values (5-10Kbps) on VLAN interface, outbound counter values showed me
>> the same result. But when i check out current traffic on a "end-mile
>> switch" I see right values (1Gbps).
>>
>> 5 min googling my issue told me IOS 12.2 has some bugs. How can I fix
>> this?
>
> I've, generally, not been able to get any useful graphing out of an SVI.
>
> On boxes where we use them to just tie up an EFP (ME3600X, for example),
> EFP's have their own SNMP data structures that work just like a physical
> interface. So we don't really graph SVI's.
>
> Mark.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/