[c-nsp] Nexus 9300

[CiscoNSP List]

Cheers Andrew - Can you add a default route? (Or is that when the license is needed?)



________________________________________
From: Andrew Jones <Andrew.Jones at optus.com.au>
Sent: Tuesday, 26 May 2015 10:03 AM
To: CiscoNSP List; cisco-nsp at puck.nether.net
Subject: RE: Nexus 9300

My experience with nexus 5k range is that management SVI are fine, but they don't do any routing. Or you can use the dedicated management port, which is in its own vrf.

I haven't tried this on 9300 platform, but it should be the same.

Andrew Jones


-----Original Message-----
From: CiscoNSP List [mailto:CiscoNSP_list at hotmail.com]
Sent: Tuesday, 26 May 2015 10:01 AM
To: Andrew Jones; cisco-nsp at puck.nether.net
Subject: Re: Nexus 9300


> Keep an eye out for announcements at Cisco live, along with a new 6840, I wouldn't be surprised if a new 3850 with more 10g ports pops up too. (although it could be a while until they start to ship) otherwise 9372 looks good, keep in mind if you ever want to do any > layer 3 you need an additional license.



Thanks Andrew - Re L3 on the Nexus...Even if I only need a single vlan Int for management, Ill need an additional license? (Thats the only L3 we currently do on the 4500X's)


Cheers.