[c-nsp] BGP peering visibility

[Nick Cutting]

It looks fine on all of the UK ones I've logged in to I've checked the 5 on routeserver.org

Just this one provider with many of my clients, still using the other inbound route.
They only provide a web page, not a command prompt.

-----Original Message-----
From: Scott Granados [mailto:scott at granados-llc.net] 
Sent: 03 November 2015 14:44
To: Nick Cutting
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] BGP peering visibility

Route servers are your friend here.

There are things like the U Oregon route server where you basically log in to a Cisco like prompt and can use all your show commands and various match criteria to display the parts of the table you care about.  These servers usually have many peers and have good visibility.
	Another thing are obviously looking glasses although these are less flexible.  I think trace route.org used to have a decent collection.

You should be able with the looking glass on your target ISP though see your routes installed and what bits they have set on them.  It’s likely they are playing with local pref in some way and using that to make routing decisions instead of your AS prepends.

Thanks
Scott

> On Nov 3, 2015, at 9:15 AM, Nick Cutting <ncutting at edgetg.co.uk> wrote:
> 
> Good afternoon,
> 
> I've have a datacenter that I have failed over to use our secondary link to the internet. At this location we only accept a default route from each carrier. Outbound was simply set with local pref.
> 
> Inbound, I'm now sending a load of prepends and a last resort community. 
> My clients connecting to various hosted services are generally using two major UK business internet carriers.  
> One carrier - is working as expected and I can see best paths on the looking glass I expect.  
> 
> However the Other carrier's looking glass - which is what the other 40 percent of clients use, is using the inbound route with multiple prepends and the last resort community.  
> 
> I have a ticket open with the carrier I wanted to  make secondary inbound- (to check communities are being received and are correct).
> However, I was hoping to do some investigation myself for my own understanding as much as trying to fix this issue - while I wait for their reply.
> 
> I imagine many people on this list have decent visibility as you probably have multiple peerings.  
> What tools are out there that may help me with my limited visibility?
> I want to see the how the carriers that my clients are using are connected to my own upstream ISP's - I'm not sure how to go about this.
> 
> Any tips or knowledge would be greatly appreciated.  Also - I'm not sure what can be mentioned in these emails - in terms of who these carriers are.
> 
> Thank you,
> 
> Nick
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/