[c-nsp] ASR903 Service instance MTU

Sat Nov 7 02:12:35 EST 2015

Yes, you can, providing the MTU you are setting for the xconnect is lower than the interface MTU, if it is not, the command will (at least in XE 3.13) change the MTU of the interface that has the service instance

Kind regards,
Sibbi

On 07/11/15 05:59, "cisco-nsp on behalf of George Giannousopoulos" <cisco-nsp-bounces at puck.nether.net on behalf of ggiannou at gmail.com> wrote:

>Hi,
>
>I can't really test it right now, but you should be able to adjust MTU as a
>sub-command of xconnect, under the service instance.
>
>--
>George
>
>On Sat, Nov 7, 2015 at 12:03 AM, Mohammad Khalil <eng_mssk at hotmail.com>
>wrote:
>
>> Hi all
>> I was wondering on ASR903 , can I adjust MTU under the service instance ?
>> I can do that under the BDI interface , but that will do it for me ?
>>
>> BR,
>> Mohammad
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/