[c-nsp] Nexus / VPC - Management port "needed" in VPC?

[George Giannousopoulos]

Hi,

I suggest you take a look at
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
I believe it will answer most (if not all) of your concerns

--
George

On Thu, Nov 19, 2015 at 11:07 PM, CiscoNSP List <CiscoNSP_list at hotmail.com>
wrote:

> Hi Everyone(Sent this yesterday, but it seems to have not made it to the
> list?),
>
>
> We have a customer that is wanting to do VPC on some N9Ks and also N3Ks -
> I "thought" VPC would be similar to VSS...i.e. dual link between the
> switches...but my (brief) reading up on the setup, I see some setup guides
> where there are dual links(2 x 10Gb, or 2 x 40Gb), plus the use of the
> management port for vPC peer keepalives?
>
>
>
> http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3000-series-switches/white_paper_c11-685753.html
>
> Any info on the "correct"  method to setup VPC on the Nexus would be
> greatly appreciated
>
>
>
> Thanks.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>