[c-nsp] ME3600 QoS

Mark Tinka mark.tinka at seacom.mu
Sat Oct 3 02:19:06 EDT 2015



On 1/Oct/15 10:29, Nick Hilliard wrote:

> yep, that's correct.  If you want to use qos on an SVI, you need to attach
> the service policy to the service policy on the physical interface(s).
> Better still, don't use SVIs on this platform if you can get away with
> using physical ports.

Would be good if IP were supported on EFP's, but alas, running IP on an
interface means creating a BD, which means an SVI.

But that is fine.

Mark.


More information about the cisco-nsp mailing list