[c-nsp] Peering Router/Switch

Oleksii Zolotarov rdm at infocom.zp.ua
Mon Oct 5 05:05:44 EDT 2015


FYI: Pushing 300Mbps/150Mbps up to channels and same traffic down to 
clients will cause 40..50% CPU usage on 7201 with this kind of 
configuration.

Source: personal experience


10/5/2015 11:43 AM, Mark Tinka пишет:
>
> On 4/Oct/15 22:47, Samir Abid Al-mahdi wrote:
>
>> Hi,
>>
>> Thanks alot for the insight.
>>
>> I think we will be tight on budget. Maybe that is why a l2/l3 device is
>> suggested.
>>
>> Do you think there is a cisco equlivant that support two functionalities
>> specially the bgp and enough space for the routing table ? As you have
>> pointed the necessity of this.
>>
>> Appreciate your support.
> If you're going to push less than 1Gbps of traffic, get a used 7201 or
> 7206-VXR/NPE-G2. That will be loads cheap.
>
> Mark.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Regards, Oleksii Zolotarov
system administrator
ISP "Seech-Infocom"



More information about the cisco-nsp mailing list