[c-nsp] 6VPE on 7600 RSP720 3CXL

[Mark Tinka]

On 14/Oct/15 14:32, krunal shah wrote:
> hi NSPs,
>
> Is any one doing 6VPE and importing full IPv4 and IPv6 routes in same VRF?
>
> I am planning to implement full IPv6 and IPv4 routes in same VRF that is
> used for internet service and other PE routers would only get subset or
> default routes. Suip has 4 GB of memory, My 1M TCAM space is carved with
>
> FIB TCAM maximum routes :
> =======================
> Current :-
> -------
>  IPv4                - 768k
>  MPLS                - 16k (default)
>  IPv6 + IP Multicast - 120k (default)
>
>
> Just want to make sure that this can be achieved.

We are doing 6VPE on all our Cisco and Juniper gear in the same VRF, but
not the full Internet table.

Mark.