[c-nsp] L2 over L3 scenario

[James Bensley]

On 23 October 2015 at 10:29, James Bensley <jwbensley at gmail.com> wrote:
> A load of bollocks

I forgot, these are some notes I took during labs;

http://null.53bits.co.uk/index.php?page=mst-refresh

http://null.53bits.co.uk/index.php?page=l2tpv3-port-based-xconnect

http://null.53bits.co.uk/index.php?page=l2tpv3-rpw

I did some testing with bridges too when spanning tree is present, as
I don't normally use them in such a scenario. You may need to use
bridges in a scenario where you are extending layer 2 through
something like an ISR-G2, IRB does interfere so it's no advised:
http://null.53bits.co.uk/index.php?page=l2-bridging

Cheers,
James.