[c-nsp] L2VPN Ingress Policing on ME3600

[Amos Thong]

Hi All, 
 



Can any share if a L2VPN ingress policing on a ME3600, is doing accounting at L1 or L2 frame ? 


(a) L2 Frame ( aka MEF service frame ) without the
"Inter-Frame Gap" and "Preamble & Start of Frame"


(b) L1 Frame ( aka 802.3 frame ) that is inclusive of
"Inter-Frame Gap" and "Preamble & Start of Frame"



Input is appreciated. Typical config is as follow. 
 
Regards
Amos
 
interface GigabitEthernet0/1
 description l2vpn:customer
 switchport trunk allowed vlan none
 switchport mode trunk
 mtu 9178
 no cdp enable
 hold-queue 2000 in
 service instance 1 ethernet                        
 description l2vpn:customer
  encapsulation dot1q 1000                        
  rewrite ingress tag pop 1 symmetric                       
  service-policy input CUSTOMER-QOS-IN-L2VPN-6M
  service-policy output CUSTOMER-QOS-OUT-L2VPN-6M
  bridge-domain 1000            
 
 
interface Vlan1000
 description  l2vpn:customer
 mtu 9178
 bandwidth 6000
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 xconnect 223.28.0.41 5053 encapsulation mpls pw-class eompls-interworking-ethernet     
 hold-queue 2000 in                                                                           
end