[c-nsp] Does Cisco 3845 support EHWIC-1GE-SFP-CU ?

[Juergen Marenda]

3845 does not support EHWIC .
ISR(-1) maximum H-WIC, never E-H-WIC.

The build-in ethernet Ports are sufficient to overload that box.
Use a NM-FE[12] to get an dedicated FastEthernet-management port.

Also keep in mind that most ethernet-WICs 
or low-density-etherswitch-wic's may have deficits in MTU, VLAN-Tagging, ...
So read the datasheet and release notes first carefully 
and then don’t bay.

Just my 0.01$,

Juergen.

-----Ursprüngliche Nachricht-----
Von: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] Im Auftrag von
Zahid Khan
Gesendet: Dienstag, 8. September 2015 17:00
An: cisco-nsp at puck.nether.net
Betreff: [c-nsp] Does Cisco 3845 support EHWIC-1GE-SFP-CU ?

Hi Folks,

Can anybody please help me to find whether Cisco 3800 series routers support
EHWIC-1GE-SFP-CU card?

--
Regards,

Zahid Khan