[c-nsp] NAC/802.1x and multiple users on one port

[Raymond Lucas (AP)]

Rob,

I haven’t used it, but Per Session VLAN Assignment might help you out here.

If you can’t find anything on CCO, search for 802.1x and/or “identity based networking” on ciscolive.com.

Ray

From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Hass
Sent: Monday, 14 September 2015 6:31 a.m.
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] NAC/802.1x and multiple users on one port



Hi
I have scenario where for each port on my Catalyst (Cat3650) are connected
unmanageable small switch (8 ports cheap HP). Can I still use 802.1x and
NAC (ISE) for this particular port ? If yes, how filtering is done ? ACLs ?
I assume that guest-VLAN/quarantine-VLAN cannot be used in this
configuration.

Rob
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


itevomcid