[c-nsp] Catalyst 6880-X and GLC-T

Aaron DuShey adushey at gmail.com
Tue Sep 15 14:58:11 EDT 2015


Yes Cisco GLC-T at 10/100/1000 works on 6880-X-LE. Keep in mind
bug CSCup92134 that's fixed in newer releases which prevents hard-coding of
ports.

See below:
R1# sh run int te5/5
interface TenGigabitEthernet5/5
 switchport
 switchport mode access
 switchport access vlan 299
 speed 10
 duplex full

R1#sh int status
Port          Name               Status       Vlan       Duplex  Speed Type
Te5/5                            connected    299          full       10
    10/100/1000BaseT

R34#sh ver
Cisco IOS Software, c6880x Software (c6880x-ADVENTERPRISEK9-M), Version
15.2(1)SY1, RELEASE SOFTWARE (fc5)
System image file is "bootdisk:/c6880x-adventerprisek9-mz.SPA.152-1.SY1.bin"

Regards,
Aaron

On Sun, Sep 13, 2015 at 2:27 PM, Robert Hass <robhass at gmail.com> wrote:

> Hi
> I have question are speeds 10M and 100M supported on GLC-T SFP (RJ45
> 10/100/1000) on Catalyst 6880 ?
>
>


More information about the cisco-nsp mailing list