[c-nsp] Xconnect Precednce

[Mohammad Khalil]

Hi all
I am trying to test different tos values between CEs 
What am trying to test is default traffic which will fall into the routine traffic and another flow which should fall in the critical traffic (tos=160) 

My access-list looks as below


access-list 105 permit ip any any precedence routine log

access-list 105 permit ip any any precedence priority log

access-list 105 permit ip any any precedence immediate log

access-list 105 permit ip any any precedence flash log

access-list 105 permit ip any any precedence flash-override
log

access-list 105 permit ip any any precedence critical log

access-list 105 permit ip any any precedence internet log

access-list 105 permit ip any any precedence network log

access-list 105 permit ip any any




interface GigabitEthernet0/1.56ip access-group 105 in

ip access-group 105 out


ping 10.3.3.1 repeat 19 tos 160 

ping 10.3.3.1 repeat 15

 

Probe#sh ip access-lists
105           

Extended IP access list 105

    10 permit ip any any precedence routine log (34 matches)     


    20 permit ip any any precedence priority
log

    30 permit ip any any precedence immediate
log

    40 permit ip any any precedence flash log

    50 permit ip any any precedence
flash-override log

    60 permit ip any any precedence critical log


    70 permit ip any any precedence internet
log

    80 permit ip any any precedence network
log

    90 permit ip any any
The 19 ICMP packets should fall into the critical 
I have tested this on GNS3 and it worked fine !
Is there something global should be enabled on the PE which is 7606? 

BR,Mohammad