[c-nsp] L2VPN between ASR920 and Juniper

[Vinod Kumar Balasubramanyam (vinbalas)]

Hello Alireza,

Could you please send me the complete output of "show mpls l2transport vc
detail" on asr 920 and also the equivalent out put on Juniper.

Thanks,


Vinod Kumar Balasubramanyam
ENGINEER.TECHNICAL MARKETING

vinbalas at cisco.com
WebEx Social profile <http://iwe.cisco.com/web/vinbalas>
Phone: +1 408 527 2051
Mobile: +1 919 802 8751

CCIE - 25703

www.cisco.com <http://www.cisco.com/>

 Think before you print.
This email may contain confidential and privileged material for the sole
use of the intended recipient. Any review, use, distribution or disclosure
by others is strictly prohibited. If you are not the intended recipient
(or authorized to receive for the recipient), please contact the sender by
reply email and delete all copies of this message.
Please click here 
<http://www.cisco.com/web/about/doing_business/legal/cri/index.html> for
Company Registration Information.





On 9/21/15, 5:19 AM, "cisco-nsp on behalf of Alireza Soltanian"
<cisco-nsp-bounces at puck.nether.net on behalf of soltanian at gmail.com> wrote:

>Hi Everybody
>
>When I try to establish L2VPN connection between ASR920 and Juniper M320,
>I
>have this output on ASR920:
>
> 
>
>ASR920#show mpls l2transport vc detail
>
>Local interface: Gi0/0/4 up, line protocol up, Eth VLAN 810 up
>
>  Destination address: 10.234.233.29, VC ID: 2631, VC status: down
>
>    Last error: Imposition VLAN rewrite capability mismatch with peer
>
> 
>
>I am using different VLANs on both side:
>
>ASR920: VLAN 810
>
>Juniper M320: VLAN 2631
>
> 
>
>This is configuration on ASR side:
>
> 
>
>interface GigabitEthernet0/0/4
>
>no ip address
>
>media-type auto-select
>
>negotiation auto
>
>service instance 1 ethernet
>
>  encapsulation dot1q 810
>
>  rewrite ingress tag pop 1 symmetric
>
>  xconnect 10.234.233.29 2631 encapsulation mpls
>
> 
>
>this is configuration on Juniper M320
>
> 
>
>set interfaces xe-1/0/0 unit 2631 encapsulation vlan-ccc
>
>set interfaces xe-1/0/0 unit 2631 vlan-tags outer 3012
>
>set interfaces xe-1/0/0 unit 2631 vlan-tags inner 2631
>
>set interfaces xe-1/0/0 unit 2631 input-vlan-map pop
>
>set interfaces xe-1/0/0 unit 2631 output-vlan-map push
>
> 
>
>set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631
>virtual-circuit-id 2631
>
>set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631
>no-control-word
>
>set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631 mtu
>1500
>
> 
>
>Do you have any idea what is the issue?
>
> 
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/