[c-nsp] L2VPN between ASR920 and Juniper

[sthaug at nethelp.no]

> If EoMPLS over GRE is not supported so why EoMPLS without GRE is supported?

Presumably because you can run EoMPLS over MPLS (which you would then
run over Ethernet). This is pretty standard for many operators.

> Anyway If we use GRE just for routing the traffic (MPLS/IP) does it work
> properly? In my tests I did not have any issue with routing MPLS/IP traffic
> over GRE between two 920 or 920 with other routers(M320,7200VXR,2821,..) but
> it was in the lab with a little amount of traffic. I am talking about 4 or 5
> Gbps traffic.

If somebody from Cisco says that it is not supported I would listen
very carefully.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no