[c-nsp] csr1000v - GNS3 - i only see aux port console

Mohammad Khalil eng_mssk at hotmail.com
Thu Apr 21 02:34:10 EDT 2016


Hi Aaron
My advice is to use VMware workstation instead of virtualbox for this image

BR,

> From: aaron1 at gvtc.com
> To: cisco-nsp at puck.nether.net
> Date: Wed, 20 Apr 2016 19:44:31 -0500
> Subject: [c-nsp] csr1000v - GNS3 - i only see aux port console
> 
> I seem to almost have csr1000v working in GNS3. but I only have aux port on
> console. any idea how to get the serial port console working ?
> 
>  
> 
> I'm using..
> 
> Windows 7
> 
> virtual box
> 
> gns3
> 
> csr1000v-universalk9.03.17.01.S.156-1.S1-std.iso
> 
>  
> 
> ----------------------------------------------------------------------------
> ---
> 
>  
> 
> csr-01 console is now available... Press RETURN to get started.
> 
>  
> 
> Router aux port is now available
> 
>  
> 
> Press RETURN to get started.
> 
>  
> 
> RP_0(diag)>
> 
>   disable   Turn off privileged commands
> 
>   enable    Turn on privileged commands
> 
>   exit      Exit
> 
>   help      Description of the interactive help system
> 
>   terminal  Set terminal line parameters
> 
>  
> 
>  
> 
> - Aaron
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
 		 	   		  


More information about the cisco-nsp mailing list