[c-nsp] csr1000v - GNS3 - i only see aux port console

[Howard Jones]

You need to redirect the serial port (the console of the router is on 
the serial port).

http://lesser-evil.com/2014/08/ios-xrv-serial-port/



On 21/04/2016 01:44, Aaron wrote:
> I seem to almost have csr1000v working in GNS3. but I only have aux port on
> console. any idea how to get the serial port console working ?
>
>   
>
> I'm using..
>
> Windows 7
>
> virtual box
>
> gns3
>
> csr1000v-universalk9.03.17.01.S.156-1.S1-std.iso
>
>   
>
> ----------------------------------------------------------------------------
> ---
>
>   
>
> csr-01 console is now available... Press RETURN to get started.
>
>   
>
> Router aux port is now available
>
>   
>
> Press RETURN to get started.
>
>   
>
> RP_0(diag)>
>
>    disable   Turn off privileged commands
>
>    enable    Turn on privileged commands
>
>    exit      Exit
>
>    help      Description of the interactive help system
>
>    terminal  Set terminal line parameters
>
>   
>
>   
>
> - Aaron
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/