[c-nsp] MPLS route reflectors

[Mark Tinka]

On 25/Apr/16 11:53, razvan romanescu via cisco-nsp wrote:

> Hi,
> You can use ASR1001-X (this is what we use). The only thing which you need is RAM. You would not even need to have 10G interface, as you would do just RR(they will be out-of-band). 1 Gig interface is more then enough.

Which is the same thing as a CSR1000v - and a server comes with a lot
more RAM than a physical router.

If you were greenfielding an RR, I'd not go physical in 2016.

Mark.