[c-nsp] ASA for IPv6

[Matthew Huff]

A couple of gotchas:

1) it doesn’t speak IPv6 EIGRP
2) It doesn’t support RDNSS  (RFC6106)
3) It’s DHCPv6 support doesn’t support providing DNS in DHCPv6 (although DHCPv6 relaying works fine).



> On Aug 20, 2016, at 8:14 PM, chris <chris at nifry.com> wrote:
> 
> 
> 
> 
> Pretty much as youve said.
>  Asa works fantasticly well with v6 ... including ospfv3 and v6 tunnelling for.anyconnect.
>  
> 
> Sent from my Samsung device
> 
> -------- Original message --------
> From: Michael Lee <fwissue at gmail.com> 
> Date: 20/08/2016  10:56 p.m.  (GMT+00:00) 
> To: cisco-nsp at puck.nether.net 
> Subject: [c-nsp] ASA for IPv6 
> 
> Hi,
> 
> Currently I have ASA 5580 with IPv4 NAT setup (public IP outside and RFC
> 1918 inside), I am considering to run IPv6 with Public IPv6 outside and
> Public IPv6 inside (routing mode)
> 
> Just wondering there is anything I would need to consider except CPU,
> memory and sessions)
> 
> Thanks,
> 
> ~mike
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/