[c-nsp] VPLS Autodiscovery Redundant CE
Mohammad Khalil
eng_mssk at hotmail.com
Wed Dec 28 04:35:57 EST 2016
Hi all
I have the below topology:
CE1 -- CSR1 -- CSR2 -- CE2
| ---- \ CSR3 /
I have configured full mesh iBGP between the CSR routers under the l2vpn vpls address-family
Below is the respective VPN configuration:
CSRs:
l2vpn vfi context MSSK
vpn id 100
autodiscovery bgp signaling ldp
bridge-domain 100
member GigabitEthernet3 service-instance 100
member vfi MSSK
interface GigabitEthernet3
service instance 100 ethernet
encapsulation dot1q 100
CEs:
interface FastEthernet1/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface vlan 100
ip address 10.10.100.1 255.255.255.0 (CE2 is configured with 10.10.100.2)
Now , the issue is that when I shutdown CSR3 G3 interface (Connected to CE1) , I lose connectivity between the CEs even though the L2VPN is established among all PEs , as well , when I check the show bgp l2vpn vpls all I cannot figure out which one is preferred
Thanks
BR,
Mohammad
More information about the cisco-nsp
mailing list