[c-nsp] Newbie traceroute question

[Matěj Grégr]

Hi Hank,
  you can check:
http://www.cisco.com/c/en/us/support/docs/ip/ip-routed-protocols/22826-traceroute.html

It doesn't answer your specific question about MPLS, but there are some
useful information - which protocol is used by default, reply codes,
differences between Linux/Windows/Cisco, etc.

M.

On 02/09/2016 07:26 PM, Hank Nussbacher wrote:
> When doing a traceroute from a Cisco IOS, what is being done under the
> hood so that sometimes I am able to see MPLS hops from within the
> traceroute?
> 
> Thanks,
> Hank
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>