[c-nsp] BGP extcommunity in the default table

[Adam Vitkovsky]

Hi Mihai,

> Mihai Gabriel
> Sent: Friday, February 12, 2016 2:43 PM
>
> Hi Adam,
>
>  I think the community should show up in the local bgp table event without a
> bgp neighbor configured, like the basic communities.
> I have already configured the 'send-community' command but the
> community is not advertised, which is normal because it is not set:)
>
Looks like XR supports setting extcommunity on neighbour-out attach point -so worth trying in vanilla IOS.
So rather than setting the RT while the network is introduced into BGP try setting the RT while the network is being advertised to the neighbour.

adam
















        Adam Vitkovsky
        IP Engineer

T:      0333 006 5936
E:      Adam.Vitkovsky at gamma.co.uk
W:      www.gamma.co.uk

This is an email from Gamma Telecom Ltd, trading as “Gamma”. The contents of this email are confidential to the ordinary user of the email address to which it was addressed. This email is not intended to create any legal relationship. No one else may place any reliance upon it, or copy or forward all or any of it in any form (unless otherwise notified). If you receive this email in error, please accept our apologies, we would be obliged if you would telephone our postmaster on +44 (0) 808 178 9652 or email postmaster at gamma.co.uk

Gamma Telecom Limited, a company incorporated in England and Wales, with limited liability, with registered number 04340834, and whose registered office is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.