[c-nsp] TX low alarm warning

[Karsten Thomann]

Usually it is caused by a broken fiber, but you will never know for sure until you checked it.

Gesendet von meinem BlackBerry
  Originalnachricht  
Von: Harry Hambi - Atos
Gesendet: Montag, 15. Februar 2016 12:44
An: 'cisco-nsp at puck.nether.net'
Betreff: [c-nsp] TX low alarm warning

Hi all,
Getting the following error Jan 27 04:06:25.811 GMT: %SFF8472-5-THRESHOLD_VIOLATION: Te4/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm. Does this point to a fibre or gbic error?. Any suggestions appreciated. Other end of link not alarming.


Rgds
Harry

Harry Hambi BEng(Hons) MIET Rsgb

_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/