[c-nsp] TX low alarm warning

[Jim Glassford]

Hi,

The few I've had were fiber strand related, a poorly seated or dirty 
patch cord connection.

best!
jim

On 2/15/2016 6:43 AM, Harry Hambi - Atos wrote:
> Hi all,
> Getting the following error Jan 27 04:06:25.811 GMT: %SFF8472-5-THRESHOLD_VIOLATION: Te4/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm. Does this point to a fibre or gbic error?. Any suggestions appreciated. Other end of link not alarming.
>
>
> Rgds
> Harry
>
> Harry Hambi BEng(Hons)  MIET  Rsgb
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/