[c-nsp] A9K-RSP440 SFP+ ports

[David Wilkinson]

Hi,

Thanks for confirming, we won't count this ports in our capacity planning.

Thanks

David


On 21/01/2016 17:19, Jeffrey Pazahanick wrote:
> Correct, they are only for nV clustering, and control-plane only at that.  You still need to use line card 10G ports for data plane clustering.
>
>> On Jan 20, 2016, at 11:31 AM, Tom Hill <tom at ninjabadger.net> wrote:
>>
>> On 20/01/16 17:07, David Wilkinson wrote:
>>> So I am guessing they are normal ports which can be configured to be
>>> cluster ports and could used normally to link up to rest of the network?
>> They are not, as far as I'm aware. Very much the opposite to 6500/7600
>> supervisors.
>>
>> Certainly there are no 'interfaces' that I can configure on RSP-440!
>>
>> --
>> Tom
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/