[c-nsp] Sup720: dumb question

[Dave McGuire]

  We'll that's embarrassing.  ;)  The DB25<->RJ45 adapter hood had a pin
pushed out.  It's talking now.  Guess I hadn't used that one in awhile!
Sorry for the noise, folks.

               -Dave

-- 
Dave McGuire, AK4HZ
New Kensington, PA



On February 17, 2016 3:20:12 PM Troy Beisigl <troy at i2bnetworks.com> wrote:

> Hi Dave,
>
> Have you tried to change your baud rate setting for the console? Sometimes
> that gets set to a higher speed (115200) and won't show anything. I have
> seen that happen many times.
>
> Troy Beisigl
> Director, Network Engineering
> I2B Networks, Inc. / Camzone Networks
>
>
>
>
> On Feb 17, 2016, at 10:52 AM, Dave McGuire wrote:
>
>>
>>  Hey folks.  This is sure to be a dumb question, but I'm stumped.  I am
>> new to the 6500/7600 platform, but not new to Cisco in general.
>>
>>  I've received a 7603 chassis with a Sup720 and I'm trying to get it
>> running.  I get nothing at all on the console port when I power it up.
>> Known-good cabling, etc.  All the LEDs eventually turn green and things
>> look good otherwise.  No amount of poking/prodding/power-cycling will
>> produce any output on the console port.
>>
>>  At first I thought maybe I just got a fried Sup720 board, but I have a
>> second one from another source, also represented as being functional,
>> and it exhibits identical behavior.
>>
>>  There's no CF card installed in either Sup720 board. (haven't gotten
>> that far..)
>>
>>  Am I missing something?
>>
>>  Also...I have an existing 6503; the 7603 chassis looks identical to
>> the 6503.  Are they in fact interchangeable?
>>
>>               Thanks,
>>               -Dave
>>
>> --
>> Dave McGuire, AK4HZ
>> New Kensington, PA
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>