[c-nsp] IOS CSRv1000 Power script error

[Alireza Soltanian]

To be exact the version is 3.13 this version works fine with 2.5GB of RAM.
I Also have same issue with 3.15
I dont have issue with 3.16 but it takes 4GB of RAM which I have problem
On Jan 8, 2016 7:58 PM, "Robert Hass" <robhass at gmail.com> wrote:

> Which CSR version ? I'm running couple of CSR s1000V in production and LAB
> (all in few different versions). Never had problems like you mentioned. But
> I'm always deploying on ESXi, although it shouldn't be important as VM
> Workstation should be also supported. Did you deployed CSR from OVA ?
>
> Rob
>
>
> On Fri, Jan 8, 2016 at 5:16 PM, Alireza Soltanian <soltanian at gmail.com>
> wrote:
>
>> Hi
>> I am trying to run CSRv1000 on VMWare Workstation 12. The problem is
>> whenever the machine is started I got an error about failing to run a
>> power
>> script.
>> This also causes preventing the suspension of machine.
>> The machine works fine but this error is annoying. Do you know what should
>> I do about this error?
>> Thank you
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>