[c-nsp] Configure port to supply PoE only

Marc Redeker marc.redeker at keronet.de
Fri Jan 15 10:25:14 EST 2016

I understood that this is only a test setup with just one switch involved where he wants to connect multiple APs to.
If i got this wrong, my bad and yes, he will need private vlans then.


> On 15 Jan 2016, at 16:02, Lukas Tribus <luky-37 at hotmail.com> wrote:
>> you could simply use the “protected port” feature.
> How so? He would have to configure all the other ports AND the uplink
> in that vlan as protected as well, breaking connectivity for all
> hosts.
> If only the AP port is configured as protected, the switch won't
> do anything different than without "switchport protected" config.
> Lukas

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 496 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20160115/0109bea9/attachment.sig>

More information about the cisco-nsp mailing list