[c-nsp] A9K-RSP440 SFP+ ports

[Jeffrey Pazahanick]

Correct, they are only for nV clustering, and control-plane only at that.  You still need to use line card 10G ports for data plane clustering.

> On Jan 20, 2016, at 11:31 AM, Tom Hill <tom at ninjabadger.net> wrote:
> 
> On 20/01/16 17:07, David Wilkinson wrote:
>> So I am guessing they are normal ports which can be configured to be
>> cluster ports and could used normally to link up to rest of the network?
> 
> They are not, as far as I'm aware. Very much the opposite to 6500/7600
> supervisors.
> 
> Certainly there are no 'interfaces' that I can configure on RSP-440!
> 
> -- 
> Tom
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/