[c-nsp] err-disable state on a cisco 3750 catalyst

[James Bensley]

On 13 July 2016 at 13:13, Olivier CALVANO <o.calvano at gmail.com> wrote:
> Hi
>
> i don't have the configuration of the other side, on my side :
>
> interface Port-channel1
>  switchport trunk encapsulation dot1q
>  switchport mode trunk
>
>
> interface GigabitEthernet1/0/1
>  switchport trunk encapsulation dot1q
>  switchport mode trunk
>  channel-group 1 mode active


Just one local interface in the bundle?

You are probably going to need the far side config to bottom this out.

Cheers,
James.