[c-nsp] ME3600X Stable IOS version

Jason Lixfeld jason at lixfeld.ca
Thu Jul 14 23:42:06 EDT 2016

15.3(3)S2 here, but if you run IPv6 and egress ACLs, you must pick one or the other.  Running them concurrently in any code train on that platform is very likely cause mass chaos on your box due to incorrectly allocating system memory between both features without corruption.

Sent from my iPhone

> On Jul 14, 2016, at 5:58 PM, eyeballi77 <eyeballi77 at gmail.com> wrote:
> Hi folks,
> looking to get opinions on the above.  I have reviewed some older posts
> with 15.3(3) being a common mention, but looking to see what folk are
> currently running with little / least issues..
> Standard fare is MPLS, OSPFv2, BGP VPNv4, EFP with PW.
> Features for consideration are around IPv6 with OSPFv3, BGP 6PE/VPE
> thank you.
> Neil
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list