[c-nsp] ASR9000/IOS-XR NAT/PAT

[Mack McBride]

http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-2/cg-nat/configuration/guide/b_cgnat_cg52xasr9k/b_cgnat_cg52xasr9k_chapter_011.pdf

Documentation is also helpful.


Mack McBride | Senior Network Architect | ViaWest, Inc.
O: 720.891.2502 | C: 303.720.2711 | mack.mcbride at viawest.com | www.viawest.com


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nick Hilliard
Sent: Monday, July 18, 2016 11:06 AM
To: Curtis Piehler
Cc: Cisco Network Service Providers
Subject: Re: [c-nsp] ASR9000/IOS-XR NAT/PAT

Curtis Piehler wrote:
> I've been reading documentation online about NAT/PAT on an ASR9k Router.
> Is it a requirement to have a VSM/ISM in the chassis to perform
> regular
> IPv4 PAT and/or IPv4 to IPv6 translations?

yes.

Nick

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message.