[c-nsp] Cisco IOS: Polling OSPF External LSA count via SNMP

[Mike - st257]

Andrew,

See the output below.
Thanks.
- Mike

On Sat, Jun 4, 2016 at 8:51 PM, Andrew Miehs <andrew at 2sheds.de> wrote:

>
>
> Sent from a mobile device
> >
> > Now that my typo is out of the way, I receive a zero value for the proper
> > OID.
> > .1.3.6.1.2.1.14.1.6 = No Such Instance currently exists at this OID
> > .1.3.6.1.2.1.14.1.6.0 = Gauge32: 0
> >
> > I'm able to successfully poll another router and get the proper value
> > returned.
> > Both routers are running the same IOS image.
> >
>
> Show version from both please
>

! R1 has the odd SNMP problem
R1>show version
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version
12.4(24)T5, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Fri 04-Mar-11 06:49 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, 7200 Software (C7200-KBOOT-M), Version
12.3(14)T3, RELEASE SOFTWARE (fc2)

<...omitted...>
System image file is "disk2:c7200-advipservicesk9-mz.124-24.T5.bin"
Last reload reason: Reload Command

<...legal text...>

Cisco 7206VXR (NPE-G1) processor (revision A) with 983040K/65536K bytes of
memory.
Processor board ID XXXX4188
SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.8

Last reset from power-on

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 200 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 380 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.


1 Ethernet interface
2 FastEthernet interfaces
4 Gigabit Ethernet interfaces
10 Serial interfaces
8 Channelized/Clear T1/PRI ports
509K bytes of NVRAM.

62976K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

==================================

! R2 responds back to the queried OID with the expected value
R2>show version
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version
12.4(24)T5, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Fri 04-Mar-11 06:49 by prod_rel_team

ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(15)B, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)

<...omitted...>
System image file is "disk2:/c7200-advipservicesk9-mz.124-24.T5.bin"
Last reload reason: Reload command

<...legal text...>

Cisco 7206VXR (NPE-G1) processor (revision A) with 983040K/65536K bytes of
memory.
Processor board ID YYYY8317
SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.7

Last reset from power-on

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 180 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 90 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.


3 Gigabit Ethernet interfaces
3 ATM interfaces
509K bytes of NVRAM.

509040K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102




-- 
---~~.~~---
Mike
//  SilverTip257  //