[c-nsp] ASA 5520 shaper > 150Mbps

Nick Cutting ncutting at edgetg.co.uk
Mon Mar 14 07:09:25 EDT 2016


Even on 9.1 - same limit:

mpf-policy-map-class mode commands/options:
  <64000-154400000>  Target Bit Rate (bits per second), the value needs to be multiple of 8000

This command is not supported on the X models at all.

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Artem Viklenko
Sent: 14 March 2016 07:53
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASA 5520 shaper > 150Mbps

Hi, All!

ASA 5550 with Cisco Adaptive Security Appliance Software Version
8.2(5)59

Trying to shape outgoing traffic on ~290Mbps (upstream provides 300Mbps).
But ASA allows only:


ASA1(config-pmap-c)# shape average ?

mpf-policy-map-class mode commands/options:
   <64000-154400000>  Target Bit Rate (bits per second), the value needs 
to be
                      multiple of 8000

Is it possible to set shaper bigger than 150Mbps at all?

Thanks in advance!

-- 
Regards!
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list