[c-nsp] MPLS L3VPN Hub and Spoke

Mark Tinka mark.tinka at seacom.mu
Thu Mar 17 10:59:12 EDT 2016

On 17/Mar/16 16:46, Mohammad Khalil wrote:

> Dears
> I have 100 branch and 1 HQ for a customer
> The proposed MPLS L3VPN 
> What am seeking is to control spoke to spoke communication 
> i.e. no communication for the spoke except with the hub , even if I wanted the spoke to communicate with another spoke it should be through the hub site
> I have one VRF configured

Play with RT's.

Use an RT on each spoke that imports only the routes from the hub. That
RT should not be used for export by any other spoke to the hub.


More information about the cisco-nsp mailing list