[c-nsp] MPLS L3VPN Hub and Spoke

[Saku Ytti]

On 17 March 2016 at 21:09, Mark Tinka <mark.tinka at seacom.mu> wrote:

> The OP said that any communications between the spokes should transit
> the hub. So this will enable that.

I'm sure he wants them to go via HUB PE => HUB CPE => FW or something.
Bridging via HUB PE would be full-mesh with shared-risk and high
latency, which seems non-sensical.

> If the OP does not want the spokes to ever communicate with each other
> (even if via the hub), then that can be solutioned too.

-- 
  ++ytti