[c-nsp] ASR920 vlan pass through

[John Gaffney]

I am assuming that you want the traffic to stay layer 2? That is no routing of the VLAN?

Sounds to me like you need either layer2 MPLS (EoMPLS) or maybe just a dot1q tunnel port. Not sure about what would work better for a 920, but I would start looking at those two rather than do bridge domains.

Thanks,

john gaffney  
north atlantic networks
www.nan.com




The information contained in this email is confidential and may contain proprietary information. It is meant solely for the intended recipient. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. No liability or responsibility is accepted if information or data is, for whatever reason corrupted or does not reach its intended recipient. No warranty is given that this email is free of viruses. The views expressed in this email are, unless otherwise stated, those of the author and not those of North Atlantic Networks, LLC. North Atlantic Networks, LLC reserves the right to monitor, intercept and block emails addressed to its users or take any other action in accordance with its email use policy. If you believe you have received this email in error, please contact: security at nan.com.


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Greg Antic
Sent: Wednesday, May 11, 2016 11:02 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASR920 vlan pass through

Forgive the simplicity of this question but I haven't found any literature to convince me.

Is this the only or best way to "pass" vlans through the ASR920? We have a circuit coming in with multiple vlans in no order and want to send them out another interface without modification.

interface GigabitEthernet0/0/5
no ip address
negotiation auto
service instance 1 ethernet
  encapsulation dot1q 10,20,30,40
  bridge-domain 1

interface GigabitEthernet0/0/7
description Uplink to pod01-esw01
no ip address
negotiation auto
service instance 1 ethernet
  encapsulation dot1q 10,20,30,40
  bridge-domain 1

Thanks,

Greg

****************************************************************
The views expressed in this email are, unless otherwise stated, those of the author and not those of Smart Technology Centre or its management.  The information in this email is confidential and is intended solely for the addressee. Access to this email by any other party is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted or does not reach its intended destination.
***************************************************
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



----NAN Cloud Services, powered by McAfee, has scanned and cleared this message
of any viruses.----