[c-nsp] ASR920 vlan pass through
Greg Antic
greg.antic at stc.za.com
Wed May 11 14:05:39 EDT 2016
Yeah Aaron it does work. From what i have seen this is the only way to replicate catalyst L2 operation.
Kind Regards,
Greg Antic
Smart Technology Centre (Pty) Ltd
+27 87 310 1751 / Tel
greg.antic at stc.za.com<mailto:greg.antic at stc.za.com>
Block 2, Townsend Office Park, No. 1 Townsend Road,<x-apple-data-detectors://18> Bedfordview, 2008
On 11 May 2016, at 7:12 PM, Aaron <aaron1 at gvtc.com<mailto:aaron1 at gvtc.com>> wrote:
Does that config work greg ? looks like it should.
- Aaron
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Greg
Antic
Sent: Wednesday, May 11, 2016 10:02 AM
To: cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
Subject: [c-nsp] ASR920 vlan pass through
Forgive the simplicity of this question but I haven't found any literature
to convince me.
Is this the only or best way to "pass" vlans through the ASR920? We have a
circuit coming in with multiple vlans in no order and want to send them out
another interface without modification.
interface GigabitEthernet0/0/5
no ip address
negotiation auto
service instance 1 ethernet
encapsulation dot1q 10,20,30,40
bridge-domain 1
interface GigabitEthernet0/0/7
description Uplink to pod01-esw01
no ip address
negotiation auto
service instance 1 ethernet
encapsulation dot1q 10,20,30,40
bridge-domain 1
Thanks,
Greg
****************************************************************
The views expressed in this email are, unless otherwise stated, those of the
author and not those of Smart Technology Centre or its management. The
information in this email is confidential and is intended solely for the
addressee. Access to this email by any other party is unauthorised. If you
are not the intended recipient, any disclosure, copying, distribution or any
action taken or omitted in reliance on this, is prohibited and may be
unlawful. Whilst all reasonable steps are taken to ensure the accuracy and
integrity of information and data transmitted electronically and to preserve
the confidentiality thereof, no liability or responsibility whatsoever is
accepted if information or data is, for whatever reason, corrupted or does
not reach its intended destination.
***************************************************
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
****************************************************************
The views expressed in this email are, unless otherwise stated,
those of the author and not those of Smart Technology Centre or
its management. The information in this email is
confidential and is intended solely for the addressee. Access to
this email by any other party is unauthorised. If you are not the
intended recipient, any disclosure, copying, distribution or any
action taken or omitted in reliance on this, is prohibited and
may be unlawful. Whilst all reasonable steps are taken to ensure
the accuracy and integrity of information and data transmitted
electronically and to preserve the confidentiality thereof, no
liability or responsibility whatsoever is accepted if
information or data is, for whatever reason, corrupted or does
not reach its intended destination.
***************************************************
More information about the cisco-nsp
mailing list