[c-nsp] Cat 6500/sup720 doesn't boot

[listas at cutre.net]

Hello all

I got a Cat6504 with sup720 that supposely worked when it was dismounted (same company, another division) but it came without a CF.

So I formated a CF in another 6500, copied the IOS and tried to boot from disk0 without luck. I tried erasing nvram and I even copied a boot image and the IOS ROMMON image to the CF but I always got the same message:


rommon 1 > boot disk0:s72033-boot-mz.122-33.SXI14.bin
Loading image, please wait ...


*** TLB (Store) Exception ***
Access address = 0x10000403
PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003

monitor: command "boot" aborted due to exception
rommon 2 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
Please reset before booting
rommon 3 > reset

System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

Autoboot: failed, BOOT string is empty
rommon 1 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
Loading image, please wait ...


*** TLB (Store) Exception ***
Access address = 0x10000403
PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003

Does anybody can provide any help or pointer to help? Cisco website wasn’t of too much hep.