[c-nsp] looking to find the best cisco device

[Matthew Huff]

BTW, neither Nick's nor my suggestion will take full internet Ipv4 routes by default although the N9K will take a max of 896k routes fully configured. That doesn't leave much head room with Ipv4 + ipv6 routes taking ~650k now.



----
Matthew Huff             | 1 Manhattanville Rd
Director of Operations   | Purchase, NY 10577
OTA Management LLC       | Phone: 914-460-4039
aim: matthewbhuff        | Fax:   914-694-5669


> -----Original Message-----
> From: Nick Cutting [mailto:ncutting at edgetg.com]
> Sent: Monday, October 24, 2016 12:08 PM
> To: Matthew Huff <mhuff at ox.com>; james list <jameslist72 at gmail.com>;
> cisco-nsp NSP <cisco-nsp at puck.nether.net>
> Subject: RE: [c-nsp] looking to find the best cisco device
> 
> ASR920 with licensing (apparently Netflow now supported) - 1/4 price of
> 1001-X
> Nexus 2nd gen 9k - 93180YC-EX Switch (s-flow support) - 1/3 price of
> 1001-X
> 
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Matthew Huff
> Sent: Monday, October 24, 2016 12:00 PM
> To: james list <jameslist72 at gmail.com>; cisco-nsp NSP <cisco-
> nsp at puck.nether.net>
> Subject: Re: [c-nsp] looking to find the best cisco device
> 
> What about Nexus 3524 (Doesn't support ipv6 or sflow/netflow though),
> but does low-latency multicast and line rate with BGP and nat. If you
> need ipv6 look at some of the other nexus 30xx switches.
> 
> 
> 
> ----
> Matthew Huff             | 1 Manhattanville Rd Director of
> Operations   | Purchase, NY 10577 OTA Management LLC       | Phone:
> 914-460-4039
> aim: matthewbhuff        | Fax:   914-694-5669
> 
> > -----Original Message-----
> > From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf
> > Of james list
> > Sent: Monday, October 24, 2016 11:56 AM
> > To: cisco-nsp NSP <cisco-nsp at puck.nether.net>
> > Subject: [c-nsp] looking to find the best cisco device
> >
> > Dear expert
> >
> > I’m having a look to a scenario in order to find the best matching
> > (and
> > cheapest) device.
> >
> > I need at least 3 x 10 Gbs interface (one in ingress and 2 in egress
> > port-channel) and to support functionalities such as:
> >
> >
> > - BGP
> >
> > - Mcast PIM
> >
> > - Mcast proxy register
> >
> > - NAT
> >
> > - 10 Gbs throughput line rate
> >
> >
> > I’m looking an 1001-X but it seems support only 2 x 10 Gbs interface
> > and 1001-HX is too much expensive.
> >
> >
> > I was looking for different solutions (ie 3850) but not all the
> > functionalities are supported (ie NAT).
> >
> >
> > Any other idea can you suggest to me  ?
> >
> >
> > Cheers
> >
> > James
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/