[c-nsp] IPsec on IOS-XR?
Hank Nussbacher
hank at efes.iucc.ac.il
Wed Oct 26 08:13:23 EDT 2016
I am following the IPsec example here:
http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/9221-quicktip.html
and have managed to alter the syntax to fit with IOS-XR but when I get
to crypto map commands:
*crypto map myvpn 10 ipsec-isakmp set peer 192.168.2.2 set transform-set
to_fred match address 101 *
I cannot find any comparable command syntax in IOS-XR:
RP/0/RSP0/CPU0:petach-tikva-gp(config)#crypto map VPN 15 gdoi
?
fail-close Specify a fail-close ACL.
interface Enable crypto map on an interface
ipsec-node Set the ipsec node on this crypto map
match Match values.
set Set values
What am I missing?
Thanks,
Hank
More information about the cisco-nsp
mailing list