[c-nsp] Cat6500 VLAN cannot be assigned to a routed port sub-if?

[Peter Rathlev]

On Mon, 2016-09-19 at 11:39 +0200, Anders Löwinger wrote:
> Sup2t has support in HW for using same VLAN-id on different L3 
> interfaces. Cisco has no SW to support it :(

Just to be crystal clear: Sup2T hardware and software fully supports
using same VLAN ID on different interfaces, and you can mix it with a
SVI for good measure. Nick Cutting posted a configuration snippet that
shows what can be done.

The Sup2T certainly has shortcomings but this is not one of them.

-- 
Peter